Conversion to 850 HP (625 KW) at 7,300 rpm, 890 Nm at 3,800 rpm
- Aluminum forged piston
- Engine block reinforcement by "pinning"
- Camshafts for "VarioCam"
- "Sputter" connecting rod bearings
- Changed oil pressure regulation
- 6x larger injectors
- Modified fuel pressure regulator
- 9FF hose set petrol system
- Additional Bosch Motorsport fuel pump "Intank"
- 2x turbocharger Garrett GTX 3076
- External waste gates
- Turbocharger with ball bearings and water-cooled
- Modified turbocharger mounting for new position
- 9FF Teflon hose set for turbocharger oil supply
- 2x turbocharger oil catch tank with accessories
- 9FF manifold set stainless steel
- 9FF flap exhaust system polished stainless steel
- 9FF tailpipes diameter 80 / 80mm polished stainless steel in the middle
- 2x 100cell metal motorsport catalytic converters
- Intercooler 96mm with hose set
- Intercooler mounts with small items
- Intercooler Air ducts inside and outside
- Air filter box 997 Turbo with 9FF cover
- 2x diverter valves
- 9FF intake pipes with 80mm cross section
- 9FF stainless steel Y-pressure tube 60mm polished
- BMC air filter insert
- Reinforced clutch complete with organic facing
- 997 Turbo engine control unit
- 9FF control unit programming with 2 boost pressure characteristics via switch
- 3 bar Bosch MAP sensor
- Motorsport spark plugs with 9FF special heat range
- Exhaust gas temperature sensor set
- Reprogramming of the speedometer unit for turbo operation
- boost gauge
- Conversion of the vehicle electrics / wiring harness for turbo operation
- Castrol RS 10W-60 engine oil
- Oil filter and gasket set
- 6th gear 0.82 : 1 (corresponds to 346 km/h Vmax.)
Only with 997 GT3 MK1 3.6 additionally:
- Auxiliary shaft reworked for drive oil suction pump
- New water pump housing with integrated oil suction pump
- Turbocharger oil extraction line set
Only with 997 GT3 MK2 3.8 additionally:
- 2x camshaft boxes 997 GT3 MK1 with covers
- Camshaft for turbo operation
- 2x cover exhaust shafts
- 1x suction pump turbocharger oil with mounting material
- Oil suction hose set
- 6x new ignition coils
- Conversion of the electrics to a 3-pin ignition system including relays etc.
- 2x new sprockets for outlet camshafts including accessories
Here you can place an explanation or answer to the question.
Here you can place an explanation or answer to the question.
Here you can place an explanation or answer to the question.
Here you can place an explanation or answer to the question.
Here you can place an explanation or answer to the question.
Here you can place an explanation or answer to the question.
Info columns
Emphasize your messaging
This section doesn’t currently include any content. Add content to this section using the sidebar.