Conversion to 1000+ HP (735 KW) at 7,300 rpm, 1,100+ Nm at 3,800 rpm
- Aluminum forged pistons with compression 8.0:1
- Engine block pinned and reinforced
- Camshafts for "VarioCam"
- "Sputter" connecting rod bearing
- Changed oil pressure control
- 6x BOSCH injectors
- Modified fuel pressure regulator
- 9FF hose set for fuel system
- Additional Bosch Motorsport fuel pump “Intank”
- 2x turbochargers G30 900 with ball bearings and oil-cooled
- Modified turbocharger suspension for new position
- 9FF Teflon hose set for turbocharger oil supply
- 2x turbocharger oil collection containers with accessories
- 9FF manifold stainless steel
- 9FF exhaust system polished stainless steel
- 9Ff tailpipes diameter 80 / 80mm polished stainless steel
- 2x 100cell metal motorsport catalytic converters
- Intercooler 130mm with hose set
- Intercooler suspensions with small material
- Intercooler air ducts inside and outside
- Air filter box 997 Turbo with 9FF cover
- 2x diverter air valves
- 9FF intake pipes with 80mm cross section
- 9FF stainless steel Y-pressure pipe 60mm polished
- BMC air filter insert
- Lightweight construction 1-mass flywheel complete.
- 2-disc clutch complete with organic lining
- 997 Turbo engine control unit
- 9FF control unit programming with 3 boost pressure characteristics via switch
- 3 bar MAP sensor
- Motorsport spark plugs with 9FF special heat value
- Exhaust gas temperature sensor set
- Reprogramming of the speedometer unit for turbo operation
- Boost pressure display
- Conversion of the vehicle electrical system/wiring harness for turbo operation
- Castrol RS 10W-60 engine oil
- Oil filter and gasket set
- 6th gear 0.82: 1 (corresponds to 346 km/h Vmax.)
Only for 997 GT3 MK1 3.6 additionally:
- Counter shaft converted to drive oil suction pump
- New water pump housing with integrated oil suction pump
- Turbocharger oil suction line set
Only for 997 GT3 MK2 3.8 additionally:
- 2x camshaft boxes 997 GT3 MK1 with covers
- Camshafts for turbo operation
- 2x cover outlet shafts
- 1x turbocharger oil suction pump with mounting material
- Oil suction hose set
- 6x new ignition coils
- Conversion of the electrical system to a 3-pole ignition system including relays etc.
- 2x new sprockets for exhaust camshafts including accessories
Here you can place an explanation or answer to the question.
Here you can place an explanation or answer to the question.
Here you can place an explanation or answer to the question.
Here you can place an explanation or answer to the question.
Here you can place an explanation or answer to the question.
Here you can place an explanation or answer to the question.
Info columns
Emphasize your messaging
This section doesn’t currently include any content. Add content to this section using the sidebar.